Guangzhou Cleaning Cleaning Service Co.,LtdGuangzhou Cleaning Cleaning Service Co.,Ltd
CONTACT US
Fax: 020-8726717
Tel: 020-8726717
E-MAIL: shzeneng@msn.com

Old stone renovation project

Old stone renovation project
Stone after long-term use, even if properly maintained will lose their luster because of reasonable wear; if the second complete renovation, stone floors generally do not need to be replaced, only a relatively simple polished stone renovation is needed, you will get new results.
Renovation is on the stone is stone but marble restoration renovation of damaged surfaces. Method is the use of the stone material renovates its machines with a variety of special grinding surface grinding of marble floor, composed of coarse grinding, fine grinding, polishing and, with the crystallization process, bring the stone back to its original natural texture and gloss.
What stone needs renovation
1, construction decoration, mix it will in most cases give more types of jobs, a lot of movement of personnel or material will wear or corrosion of stone surfaces, cause stone serious when large defaced, unable to meet the delivery standards; of course, sometimes because the pavement staff skills is not fine, uneven or scissors difference after laying is complete, the stone material renovates processing is needed.
2, the stone material after long-term use, even if properly maintained will lose their luster because of reasonable wear; if the second decoration stone floors generally do not need to be replaced, only a relatively simple polished stone renovation is needed, you will get new results.
Renovation process:
(A) use equipment
Stone material renovating machine, multifunctional cleaning machine, vacuums absorbing water machine, weight, diamond stone tablets, 3M, polishing pads, buckets, needles and other special tools.
(B) agents:
The stone material renovates brightener for agents, stone, stone and bright pink, K2, K3 bright hardening agent for stone pharmacy.
(C) procedure:
1, mend broken and mended in plastic: first the original broken surfaces and stone installation of nucleus Raphe Magnus back neatly cut, slot width. Then close to stone the color of marble adhesive patch.
2, cutting-grinding: use a special cutting blade grinding grind the cutting, to stone a plane as a whole.
3, grinding and polishing: using special stones from coarse to fine water mill for grinding stone, ground smooth.
4, protection: Bai Yun, Johnson or special stone conservation agent, make it fully penetrate the stone and to form water layer, thus stone material waterproofing stain and weather-resistance.
5, crystal processing: using targeted crystalline powder or crystalline chemicals combined with grinding machine, grinding under the weight of stone powder in high temperature and crystallization under integrated physical and chemical reaction, forming a layer of dense, hard protective coating and polishing treatment lay the Foundation for future maintenance.
(D) effect:
After renovation, Crystal face processing of stone surface without impurities, brightness of more than 90 degrees, 2-3 increase in hardness Mohs hardness.
Description: renovation stone, use a suitable cleaning of stone cleaning, avoid using large amounts of fluoride cleaning agents or strong acid corrosive cleaning agents, otherwise it will damage stone, accelerate the aging of the stone or make it lose its lustre.
Here are a few ways to avoid the use of chemical agents for your reference: acid fluoride fluoride acid, urea, oxalic acid, phosphoric acid, hydrogen peroxide, sulfuric acid, hydrochloric acid for industrial use. BACK